The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Engine Conversion Parts

Engine Conversion Parts Engine Conversion Parts for the Nova

Products


  • 3J Driveline Differential - F20

    3J Driveline NXG Limited Slip Differential for all Vauxhalls with F20 gearbox.

    Now available, 'New' 3J Driveline Ltd Designed and manufactured NXG (NeXt Generation). The strongest, most progressive and versatile LSD unit in the market place.

    The 3J plate packs always run with 8 active surfaces, even in our lighter settings, giving maximum surfaces and surface area contact during use. Our new pre-load spacer helps generate the pre-load. Rather than just have the 2 or 3 settings of other units, we can 'fine tune' to particular pre-load settings complemented with our choice of ramps, to get the perfect LSD set up for you.

    The Bevel and planet gear pack has been designed to be the smoothest mesh, biggest and strongest tooth profile that we have ever been involved with. Eliminating the rattle, and excessive back lash of other units. Also With the added benefit of dual ramps. Dual Ramps available are 30/90, 40/90, 30/60, 45/45, 50/90, plus more by request.

    **Please Note: In order to supply you with the best set-up for your vehicle, we will need some information about your vehicle and its intended use, as this will determine which ramp is required. Please contact us before/after ordering, by phone 01858 433599 or email sales@lmfvauxhall.com **

    SKU18466
    £714.00 (€849.66, $1128.12 )
     
    inc. VAT £119.00
  • Anti-Roll Bar Fixing Kit - Nova

    The manifold on a 2.0L engine will foul the anti-roll bar on a Nova. These brackets drop the anti-roll bar to give the necessary clearance.

    MNTG005
    £24.95 (€29.69, $39.42 )
     
    inc. VAT £4.16
  • C20XE REDTOP Air Intake Hose

    All Vauxhall C20XE 'Redtop' engines, as fitted to Astra, Cavalier & Calibra models. Also found in engine converted Nova's, Corsa's and Tigra's.

    This is the hose that splits and causes idling issues.

    Brand new and in original packaging'

    • For ALL C20XE engines.
    • Fits in between SFI box/Powercap and the Air Flow Meter.
    990664099
    £24.95 (€29.69, $39.42 )
     
    NEW
  • Cool-Running Thermostats

    82 Degree Cool-Running Thermostats.

    Suitable for the following engine types:

    • C20XE/C20LET

    • C20NE

    • X18XE/X20XEV

    • Z20LET

    • X14XE/C16XE/X16XE/X16XEL

    • C25XE/X25XE/Y26SE/X30XE/Y32SE

    STAT01
    £18.00 (€21.42, $28.44 )
    £25.48 , save 29%
    inc. VAT £3.00

    OUT OF STOCK

  • Forged Con Rods - 2.0 Turbo 16v

    Forged Con Rods for all 2000 Turbo Vauxhall engines.

    These Con-rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike. These lightweight, H-beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and fully shot-peened for higher fatigue strength. Small end bushed for fully floating pin and big end fitted with high quality ARP PRO-Wave 2000 fasteners. Suitable for high-performance street and competition uses.

    Comes with ARP rod bolts.

    Length C/C: 143.1mm

    Small end Dia: 21mm

    Big end Dia: 52mm

    Bolts supplied: ARP2000 3/8" Thread

    G0033
    £485.10 (€577.27, $766.46 )
     
    inc. VAT £80.85
  • Forged Con Rods - C20XE

    Forged Con Rods for Vauxhall C20XE engines.

    These Con-rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike. These lightweight, H-beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and fully shot-peened for higher fatigue strength. Small end bushed for fully floating pin and big end fitted with high quality ARP PRO-Wave 2000 fasteners. Suitable for high-performance street and competition uses.

    Comes with ARP rod bolts.

    Length C/C 143.1mm

    Small end Dia 21mm

    Big end Dia 52mm

    Bolts supplied? ARP2000 3/8" Thread

    PECVAUX2.0XE
    £485.10 (€577.27, $766.46 )
     
    inc. VAT £80.85
  • Forged Piston Kit "Flat Top" 87.5mm - C20XE

    "Flat Top" Forged Piston Kit (3 ring) for Vauxhall C20XE engines.

    Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance than on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger than OE bore clearances. The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns.

    Includes all piston rings and gudgeon pins.

    Spec:

    OE Bore Size - 86mm

    Available Bore Sizes - 87.5mm only

    OE Comp. ratio 10.5:1

    Wössner Comp. ratio 11.0:1

    Comp. height 30.5

    9396D150
    £561.70 (€668.42, $887.49 )
     
    inc. VAT £93.62
  • Forged Piston Kit - C20XE

    Forged Piston Kit (3 Ring) for Vauxhall C20XE engines.

    Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance than on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger than OE bore clearances. The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns.

    Includes all piston rings and gudgeon pins.

    Spec:

    OE Bore Size - 86mm

    Available Bore Sizes - 86mm, 86.5mm, 87mm, 87.5mm, 88mm

    OE Comp. ratio 10.5:1

    Wössner Comp. ratio 12.5:1

    Comp. height 30.5

    9259DA
    £561.70 (€668.42, $887.49 )
     
    inc. VAT £93.62
  • LMF Conversion Driveshafts - Nova

    LMF 1.8/2.0 litre Engine Conversion Driveshafts for the Nova. These driveshafts are manufactured to suit the bigger 2.0L outer cv-joints.

    Use with LMF hubs. Sold individually.

    DS005-NF
    £99.95 (€118.94, $157.92 )
     
    inc. VAT £16.66
  • LMF Conversion Hubs - Nova, Corsa B & C

    LMF Engine Conversion Hubs for the Nova, Corsa B & Corsa C. These 4-stud hubs are manufactured to suit the bigger 2.0L outer cv-joints.

    Use with LMF driveshafts (see related products below).

    *Also available with wheel bearing. Please choose from the drop down menu below.

    Sold individually.

    *Please note, Nova models will have either a 64mm O.D or 66mm O.D bearing, so you will need to check which is fitted to your car.

    HUB001 + 90486458
    £64.96 (€77.30, $102.64 )
     
    inc. VAT £10.83