The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Performance Camshafts

Performance Camshafts Performance Camshafts for the Vectra B ('96-01)

Products


  • Cat Cams Camshaft Pulleys X20XEV Ecotec

    Cat Cams Camshaft Pulleys for Vauxhall Astra 16v X20XEV Ecotec engines. Sold as a set.

    Cat Cams adjustable pulleys are made of top quality 7075 aluminium. In addition, the outer wheel is hard anodised for wear resistance.

    For easy and secure dyno testing, the nonius system lets you advance or retard your camshaft exactly per 1° over a range of +/- 10° (cam degrees).

    Moving the Pin (supplied) from hole to hole indexes the pulley 1 cam degree at a time for fast, easy cam timing adjustment.

    *Generic image for illustrative purposes

    CTOPK01
    £238.80 (€284.17, $377.30 )
    £264.00 , save 10%
    inc. VAT £39.80
  • Cat Cams Overhead Camshaft - 1.3, 1.4, 1.6 8v

    Cat Cams Overhead Camshaft for Vauxhall 1.3, 1.4 & 1.6 8v engines.

    Extra bhp, torque and driveability – that’s the Cat Cams performance difference. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.

    Computer simulation and CNC manufacturing techniques allow Cat Cams to pursue a unique design philosophy based on shorter durations and higher valve lifts. Compared to competitors this means Cat’s profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power.

    *BUY ONLINE AND SAVE 10% OFF RRP*

    *Generic image for illustrative purposes

    4600313
    £234.00 (€278.46, $369.72 )
    £258.72 , save 10%
    inc. VAT £39.00
  • Cat Cams Overhead Camshaft - 1.6, 1.8, 2.0 8v

    Extra bhp, torque and driveability – that’s the Cat Cams performance difference. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.

    Computer simulation and CNC manufacturing techniques allow Cat Cams to pursue a unique design philosophy based on shorter durations and higher valve lifts. Compared to competitors this means Cat’s profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power.

    *BUY ONLINE AND SAVE 10% OFF RRP*

    *Generic image for illustrative purposes

    4600534
    £234.00 (€278.46, $369.72 )
    £258.72 , save 10%
    inc. VAT £39.00
  • Newman Cams - 1.8/2.0 & 2.2 16v Ecotec

    Founded in 1966, Newman Cams have been one of the leading performance camshaft manufacturers for over 40 years. With all these years of experience, you can be confident that the time, skill, and knowledge that goes into making these camshafts, will ensure the highest possible quality.

    There are many different types of camshaft, for different vehicle uses.

    • Phase 1 Power Band: 2000 – 6500 RPM (Good tickover for use with std injection)

    • Phase 2 Power Band: 2500 – 7000 RPM (for use with twin carbs or throttle bodies)

    • Phase 3 Power Band: 3000 – 7500 RPM (Good high rpm power - not for std injection)

    *Generic image for illustration purposes only

    *Not suitable for Z18XE engines.

    VUXE/264/380H
    £480.00 (€571.20, $758.40 )
     
    inc. VAT £80.00
  • Newman Cams - Astra, Cavalier, Calibra & Vectra 1.6 1.8 2.0 8v

    Founded in 1966, Newman Cams have been one of the leading performance camshaft manufacturers for over 40 years. With all these years of experience, you can be confident that the time, skill, and knowledge that goes into making these camshafts, will ensure the highest possible quality.

    There are many different types of camshaft, for different vehicle uses.

    • Phase 1 Power Band: 2000 – 5750 RPM (Good tickover for road - use in std injection engines)

    • Phase 2 Power Band: 2500 – 6500 RPM (for use with twin carbs or throttle bodies - not std injection)

    • Phase 3 Power Band: 3000 – 7500 RPM (Good high rpm power - not for std injection)

    • Phase 4 Power Band: 4000 – 8000 RPM (Powerful high rpm cam - not for std injection)

    *Image for illustration purposes only

    VAUX/272/456H_
    £300.00 (€357.00, $474.00 )
     
    inc. VAT £50.00
  • Cat Cams Camshafts - 1.4, 1.6, 1.8 16v Ecotec

    Extra bhp, torque and driveability – that’s the Cat Cams performance difference. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.

    Computer simulation and CNC manufacturing techniques allow Cat Cams to pursue a unique design philosophy based on shorter durations and higher valve lifts. Compared to competitors this means Cat’s profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power.

    *BUY ONLINE AND SAVE 10% OFF RRP*

    *Generic image for illustrative purposes

    Sold as a set.

    4602432
    £450.36 (€535.93, $711.57 )
     
    inc. VAT £75.06
  • Cat Cams Camshafts - Rocker Roller Z22SE

    Cat Cams Camshafts for Vauxhall 2.2l Rocker Roller Engines. Sold as a set.

    Extra bhp, torque and driveability – that’s the Cat Cams performance difference. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.

    Computer simulation and CNC manufacturing techniques allow Cat Cams to pursue a unique design philosophy based on shorter durations and higher valve lifts. Compared to competitors this means Cat’s profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power. ECU Reprogramming may be required please contact us for more info.

    *BUY ONLINE AND SAVE 10% OFF RRP*

    *Generic image for illustrative purposes

    4603111
    £699.60 (€832.52, $1105.37 )
    £773.28 , save 10%
    inc. VAT £116.60
  • Cat Cams Camshafts - X18XE, X20XEV, X22XE Ecotec

    Extra bhp, torque and driveability – that’s the Cat Cams performance difference. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.

    Computer simulation and CNC manufacturing techniques allow Cat Cams to pursue a unique design philosophy based on shorter durations and higher valve lifts. Compared to competitors this means Cat’s profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power.

    *BUY ONLINE AND SAVE 10% OFF RRP*

    *Generic image for illustrative purposes

    Sold as a set.

    4602901
    £514.08 (€611.76, $812.25 )
     
    inc. VAT £85.68
  • Cat Cams Camshaft Pulleys - X14XE, X16XE 16v

    Camshaft Pulleys for Vauxhall X14XE and X16XE 16v engines. Sold as a set.

    Cat Cams adjustable pulleys are made of top quality 7075 aluminum. In addition, the outer wheel is hard anodised for wear resistance.

    For easy and secure dyno testing, the nonius system lets you advance or retard your camshaft exactly per 1° over a range of +/- 10° (cam degrees).

    Moving the Pin (supplied) from hole to hole indexes the pulley 1 cam degree at a time for fast, easy cam timing adjustment.

    *Generic image for illustrative purposes

    CTOP015
    £238.80 (€284.17, $377.30 )
    £264.00 , save 10%
    inc. VAT £39.80
  • Cat Cams Camshaft Pulleys 16v C20XE - Late Square Tooth

    Camshaft Pulleys for Vauxhall 16v C20XE engines (1994-). Sold as a set.

    Cat Cams adjustable pulleys are made of top quality 7075 aluminium. In addition, the outer wheel is hard anodised for wear resistance.

    For easy and secure dyno testing, the nonius system lets you advance or retard your camshaft exactly per 1° over a range of +/- 10° (cam degrees).

    Moving the Pin (supplied) from hole to hole indexes the pulley 1 cam degree at a time for fast, easy cam timing adjustment.

    *Generic image for illustrative purposes

    CTOP031
    £236.40 (€281.32, $373.51 )
    £264.00 , save 10%
    inc. VAT £39.40