M-Tech 4 Stud Motorsport Hubs - Corsa B/Tigra A
Special M-Tech Motorsport 4-stud wheel hubs to fit the bigger 2.0L cv-joints into the front suspension of the Corsa B / Tigra A.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Our price: £86.81
(€103.30, $137.16
)
including VAT
£14.47
M-Tech 5 Stud Motorsport Hubs - Corsa B/Tigra A
Special M-Tech Motorsport 5-stud wheel hubs to fit the bigger 2.0L cv-joints into the front suspension of the Corsa B / Tigra A.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Our price: £117.44
(€139.75, $185.56
)
RRP: £145.02
, save 19%
including VAT
£19.57
M-Tech 5 Stud Motorsport Hubs - Nova
Special M-Tech Motorsport 5-stud wheel hubs to fit the bigger 2.0L cv-joints into the front suspension of the Nova.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Use with M-Tech Motorsport driveshafts.
Sold individually.
Our price: £117.44
(€139.75, $185.56
)
including VAT
£19.57
M-Tech C20LET into Astra G (Mk4)
This kit makes it easy to fit a C20LET 2.0L 16V Turbo engine and 6-speed F28 gearbox into an Astra-G/Mk4.
This kit is specifically manufactured for Astra models with at least an X20XEV 2.0L engine as standard (136bhp Ecotec engine or higher) as the existing driveshafts are retained. Astras with 1600cc or 1800cc engines will need to be fitted with 2.0L XEV driveshafts in order to use this conversion kit.
The kit consists of:
- Engine mount right front at timing belt side.
- Hydraulic clutch bearing.
- Hydraulic clutch bearing pipe plus mounting sleeve.
- Transmission support left / front (8mm steel).
- Transmission support middle / rear side (aluminium).
- Transmission support middle / front side with rubber absorber block.
- 6-speed emblem for the gear shift lever.
- F28 2WD conversion kit.
- Nylon bushes for the gear change linkage.
- Green induction kit.
- Illustrated fitting guide.
- All fastenings required.
This kit is specifically manufactured for Astra models with at least an X20XEV 2.0L engine as standard (136bhp Ecotec engine or higher) as the existing driveshafts are retained. Astras with 1600cc or 1800cc engines will need to be fitted with 2.0L XEV driveshafts in order to use this conversion kit.
The kit consists of:
- Engine mount right front at timing belt side.
- Hydraulic clutch bearing.
- Hydraulic clutch bearing pipe plus mounting sleeve.
- Transmission support left / front (8mm steel).
- Transmission support middle / rear side (aluminium).
- Transmission support middle / front side with rubber absorber block.
- 6-speed emblem for the gear shift lever.
- F28 2WD conversion kit.
- Nylon bushes for the gear change linkage.
- Green induction kit.
- Illustrated fitting guide.
- All fastenings required.
Our price: £893.62
(€1063.41, $1411.92
)
including VAT
£148.94
M-Tech C20LET Into Tigra A
This high quality kit is the easy way to transplant a Vauxhall C20LET with an F28 gearbox into a Tigra A.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
If you have hydraulic power steering, you will also require the modified pump bracket.
This kit is also available with 5-stud hubs at additional cost.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
If you have hydraulic power steering, you will also require the modified pump bracket.
This kit is also available with 5-stud hubs at additional cost.
Our price: £980.42
(€1166.70, $1549.06
)
including VAT
£163.40
M-Tech C20LET Into Type-1 Corsa B
This high quality kit is the easy way to transplant a Vauxhall C20LET with an F28 gearbox into a Body Type 1 Corsa B. Suitable for the Body Type 1 Corsa B, i.e originally a 4 Cylinder 8 Valve without power steering.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport 4-stud wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
Two kits are available according to the year of manufacture of your Corsa. Please be sure to select the correct kit for your vehicle. If in doubt, e-mail us with the chassis number when ordering.
This kit is also available with 5-stud hubs at additional cost.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport 4-stud wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
Two kits are available according to the year of manufacture of your Corsa. Please be sure to select the correct kit for your vehicle. If in doubt, e-mail us with the chassis number when ordering.
This kit is also available with 5-stud hubs at additional cost.
Our price: £893.62
(€1063.41, $1411.92
)
including VAT
£148.94
M-Tech C20LET Into Type-2 Corsa B
This high quality kit is the easy way to transplant a Vauxhall C20LET with an F28 gearbox into a Body Type 2 Corsa B. Suitable for the Body Type 2 Corsa B, i.e. originally with power steering or a multi-valve (12v or 16v).
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport 4-stud wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
Two kits are available according to the year of manufacture of your Corsa. Please be sure to select the correct kit for your vehicle. If in doubt, e-mail us with the chassis number when ordering.
If you have hydraulic power steering, you will also require the modified pump bracket.
This kit is also available with 5-stud hubs at additional cost.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A set of motorsport driveshafts to enable the use of 2.0L inner and outer cv-joints.
- A pair of motorsport 4-stud wheel hubs to suit the 2.0L outer cv-joints.
- 2WD transmission conversion kit 731001.
- “Green” airfilter induction kit.
- Tiebar lowering brackets.
- Fitting guide and wiring diagram.
Two kits are available according to the year of manufacture of your Corsa. Please be sure to select the correct kit for your vehicle. If in doubt, e-mail us with the chassis number when ordering.
If you have hydraulic power steering, you will also require the modified pump bracket.
This kit is also available with 5-stud hubs at additional cost.
Our price: £980.42
(€1166.70, $1549.06
)
including VAT
£163.40
M-Tech C20LET into Zafira A
This kit makes it easy to fit a C20LET 2.0L 16V Turbo engine and 6-speed F28 gearbox into a Zafira A.
This kit is specifically manufactured for Zafira models with at least an X20XEV 2.0L engine as standard (136bhp Ecotec engine or higher) as the existing driveshafts are retained. Zafiras with 1600cc or 1800cc engines will need to be fittead with 2.0L XEV driveshafts in order to use this conversion kit.
The kit consists of:
- Engine mount right front at timing belt side.
- New belt for fitting on the C20LET pulley.
- Hydraulic clutch bearing.
- Hydraulic clutch bearing pipe plus mounting sleeve.
- Transmission support left / front (8mm steel).
- Transmission support middle / rear side (aluminium).
- Transmission support middle / front side with rubber absorber block.
- 6-speed emblem for the gear shift lever.
- F28 2WD conversion kit.
- Nylon bushes for the gear change linkage.
- Green induction kit.
- Illustrated fitting guide.
- All fastenings required.
This kit is specifically manufactured for Zafira models with at least an X20XEV 2.0L engine as standard (136bhp Ecotec engine or higher) as the existing driveshafts are retained. Zafiras with 1600cc or 1800cc engines will need to be fittead with 2.0L XEV driveshafts in order to use this conversion kit.
The kit consists of:
- Engine mount right front at timing belt side.
- New belt for fitting on the C20LET pulley.
- Hydraulic clutch bearing.
- Hydraulic clutch bearing pipe plus mounting sleeve.
- Transmission support left / front (8mm steel).
- Transmission support middle / rear side (aluminium).
- Transmission support middle / front side with rubber absorber block.
- 6-speed emblem for the gear shift lever.
- F28 2WD conversion kit.
- Nylon bushes for the gear change linkage.
- Green induction kit.
- Illustrated fitting guide.
- All fastenings required.
Our price: £893.62
(€1063.41, $1411.92
)
including VAT
£148.94
M-Tech C20NE, 20SEH, 18SE Into Tigra A
This high quality kit is the easy way to transplant a Vauxhall C20NE, 20SEH or 18SE engine with an F16 or F20 gearbox into a Tigra A.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A pair of special driveshafts (for use with original hubs and Tigra 1.6L outer cv-joints).
- New fastenings for front anti-roll bar.
- “Green” airfilter induction kit.
- Fitting guide and wiring diagram.
NOTE: If you have hydraulic power steering, you will also require the modified power steering pump bracket, part no. 720008.
PLEASE NOTE: THIS KIT DOES NOT CONTAIN HUBS OR CV JOINTS.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A special bodywork mount with rubber damper to go with RH engine mount.
- A pair of special driveshafts (for use with original hubs and Tigra 1.6L outer cv-joints).
- New fastenings for front anti-roll bar.
- “Green” airfilter induction kit.
- Fitting guide and wiring diagram.
NOTE: If you have hydraulic power steering, you will also require the modified power steering pump bracket, part no. 720008.
PLEASE NOTE: THIS KIT DOES NOT CONTAIN HUBS OR CV JOINTS.
Our price: £531.06
(€631.96, $839.07
)
including VAT
£88.51
M-Tech C20NE, 20SEH, 18SE Into Type-1 Corsa B
This high quality kit is the easy way to transplant a Vauxhall C20NE, 20SEH or 18SE engine with an F16 or F20 gearbox into a Body-Type 1 Corsa B. Suitable for the Body Type 1 Corsa B, i.e originally a 4 Cylinder 8 Valve without power steering.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A pair of special driveshafts (for use with original hubs and Corsa GSi outer cv-joints).
- New fastenings for front anti-roll bar.
- “Green” airfilter induction kit.
- Fitting guide and wiring diagram.
PLEASE NOTE: THIS KIT DOES NOT CONTAIN HUBS.
Manufactured by M-Tech, the kit contains:
- A set of engine and gearbox mounts.
- A pair of special driveshafts (for use with original hubs and Corsa GSi outer cv-joints).
- New fastenings for front anti-roll bar.
- “Green” airfilter induction kit.
- Fitting guide and wiring diagram.
PLEASE NOTE: THIS KIT DOES NOT CONTAIN HUBS.
Our price: £444.25
(€528.66, $701.92
)
including VAT
£74.04
