The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Engine Components

Engine Components Engine Components for the Pre-Facelift Vectra C ('02-06)

Products


  • Turbo Intercooler Hose (Silicone) 9178635 - Vectra C & Signum 2.0/2.2 DTI

    Turbo Intercooler Hose for the Vectra C (2002- ) and Signum (2003- ) Y20DTH and Y22DTR engines.

    Hose Specifications:
    • Internal Diameter (both ends) - 55mm
    • Wall thickness - 5mm
    • Length across longest ridge - 320mm
    • Manufactured from Silicone

    As you are looking at the engine bay, this is the RIGHT hand hose.
    9178635
    £29.95 (€35.64, $47.32 )
     
    inc. VAT £4.99
  • Turbo To Intercooler Pipe (Silicone) 93185363 - Vectra C & Signum 2.0/2.2 DTI

    Turbo Intercooler Hose for the Vectra C (2002- ) and Signum (2003- ) Y20DTH and Y22DTR engines.

    Hose Specification:
    • Internal Diameter (both ends) - 55mm
    • Wall thickness - 4/5mm
    • Length across longest ridge - 325mm
    • Manufactured from Silicone

    As you are looking at the engine bay, this is the LEFT hand hose.
    93185363
    £29.95 (€35.64, $47.32 )
     
    inc. VAT £4.99
  • Z19DTH Induction Manifold Swirl Flap Removal Kit

    This swirl flap removal kit allows you to re-use your original inlet/induction manifold (55210201), with the swirl flaps (which are prone to failure) REMOVED, meaning there is no need to replace your existing manifold.

    Designed specifically to work with the Pierburg inlet manifold part number 20346203 / 55210201, as fitted to 1.9CDTI 150 engines.

    This kit consists of:

    • 5 x Taper machined aluminium bushes

    • 1 x BondLoc B603 locking compound (developed for oily environments)

    Each aluminium bush is machined to a taper, so it will drop into the hole easily to locate, with around half of its length inserted. The second half of the bush is machined to a tight fit that will require the use of a G clamp*, or similar, to press it into place. This creates an incredibly strong seal. BondLoc is also used, giving even more strength than necessary.

    Once 'De-flapped' the square runner of the manifold will now be free flowing with no swirl flaps.

    The flap actuation motor should be left on the vehicle, and connected electrically, but with the lever arm disconnected. This allows the ECU to recognise that the motor is present, and working, and should not cause EML.

    *G Clamp - Not included (Available at most DIY outlets)

    From testing and daily use of CDTI (150bhp) engine Astra Van, the manufacturer of this kit reports great results from fitting the De-flap kit. No Engine management light, no rough running and no extra smoke. The engine idles just as before, through the revs it feels keener and responds to throttle inputs more quickly, and also feels more eager to rev to the redline. From testing, on a rolling road, before and after fitting the De-flap kit, the manufacturer witnessed a 3bhp gain in maximum power and a 3.5lb/ft torque gain after fitting the De-flap kit. These are not big gains but a welcome side effect from fitting the kit.

    DEFLAP001
    £38.00 (€45.22, $60.04 )
     
    inc. VAT £6.33
  • Induction Manifold - Z19DTH Astra, Signum, Vectra C, Zafira B

    This is the latest type Inlet Manifold for the 1.9 CDTI 150 engine.

    Fits the following models:

    Astra H MK5 (2005-10); Engine codes: Z19DTH & Z19DTJ

    Signum (2003- ); Engine code: Z19DTH

    Vectra C (2002- ); Engine code: Z19DTH

    Zafira B (2005-2012); Engine code: Z19DTH

    *Available with or without gasket

    55210201
    £209.95 (€249.84, $331.72 )
     
    inc. VAT £34.99
  • Throttle Body 1.8 - 9196357

    Throttle Body to fit the following:

    Astra G (98-04): Z18XE & Z18XEL engines

    Astra H (04-10): Z18XE engine

    Corsa C (01-06): Z18XE engine

    Meriva A (03-10): Z18XE engine

    Omega B (1994-2003): Y22XE & Z22XE engines

    Signum (03- ): Z18XE engine

    Tigra B (04- ): Z18XE engine

    Vectra B (96-01): Z18XE & Z18XEL engines

    Vectra C (2002- ): Z18XE & Z18XEL engines

    Zafira A (98-05): Z18XE & Z18XEL engines

    9196357-AP
    £275.75 (€328.14, $435.69 )
     
    inc. VAT £45.96

    OUT OF STOCK

  • Vectra Brake Pad Wear Sensor - 90497051

    One pair of Brake Pad Wear Sensors suitable for the following:

    • Vectra B 2.5, 2.6, 1.7 diesel & 2.2 diesel

    • Most 1.6, 1.8 & 2.0 petrol X chassis onwards (Vectra C)

    • Equivalent to Vauxhall part number 90497051 - please call us or check with your dealer that this is the one you require as we cannot be held responsible for parts that are wrongly ordered.
    90497051
    £7.96 (€9.47, $12.58 )
     
    inc. VAT £1.33
  • Diesel Crankshaft Pulley - 55351711

    Diesel Crankshaft Pulley suitable for:

    • Astra G and Zafira A 1998-2004 with:

    X20DTL Y20DTL Y20DTH Engines with manual transmission and without Air Conditioning

    and Y20DTH Engines without Air Conditioning

    and Y20DTH Y20DTL engines with automatic transmission from chassis numbers 32000001, 35000001, 36000001, 38000001 and 3H000001

    and Y20DTH Y20DTL engines with air conditioning from chassis numbers 32000001, 35000001, 36000001, 38000001 and 3H000001

    • Frontera B 1999-2004 and Omega 1994-2003 with X22DTH Y22DTH engines

    • Signum and Vectra C 2002- with Y20DTH Y22DTR engines

    • Vectra B 1996-2001 with X20DTL X20DTH Y20DTH engines and with Air Conditioning and Y22DTR engines

    **Please double check the part number on your old unit, or with a main dealer before ordering, as we cannot be held responsible for wrongly ordered parts!

    55351711
    £76.60 (€91.15, $121.03 )
     
    inc. VAT £12.77

    OUT OF STOCK